ES A24U-G2421 (Legacy product)
ES A24U-G2421
The A24U 4U-profile RAID system is the only high-density choice on the market with sophisticated RAID protection. With reliable SCSI and clustering support, the A24U-G2421 is a cost-effective, large capacity storage solution to incorporate into disk farms, ATM service centers, and imaging stations that require RAID protection at a lower cost per gigabyte.
- Highlights
- Specifications
- Accessories
- Full-featured RAID functionality with two (2) SCSI-320 host channels; transfer rate up to 320MBps each
- Up to 24TB of storage capacity
- Accommodates twenty-four (24) SATA II hard drives, backward compatible with SATA I drives
- Hardware XOR engine by dedicated ASIC266 chipsets
- Dual-speed cooling modules to reduce system noise
- Backplane-based, cableless, modular enclosure
| Host-to-Drive Interface | Model | Configuration | Form Factor |
|---|---|---|---|
| SCSI-320 to SATA II | A24U-G2421 | Single controller | 4U rackmount |
RAID
- Multiple arrays configurable with dedicated or global hot spare drives
- RAID levels: RAID0, 1 (0+1), 3, 5, 6, 10, 30, 50, 60, and NRAID
- Online expansion by:
- Adding new drives
- Copying and replacing drives with drives of larger capacity
- Automatic background rebuild
- Configurable stripe size and write policy per array
- Intelligent drive handling:
- In degraded mode: skips irreparable blocks to continue rebuild
- In normal operation: data-block verification and repair
System Components
- Single RAID controller configuration provides full-featured RAID functionality
- One (1) 4U enclosure
- One (1) RAID controller module
- One (1) 512MB DDR RAM DIMM module preinstalled on the controller module; system supports 512MB to 2GB capacity DIMM modules
- Three (3, N+1) hot-swappable, redundant, 405W power supply units
- Twenty-four (24) hot-swappable drive trays
- Two (2) hot-swappable, redundant cooling modules
- Two (2) forearm front handles
- One (1) optional battery backup unit (BBU)
Host Interface
- Two (2) SCSI-320 host channels interfaced through two (2) dual-stacked VHDCIs
- Tagged command queuing up to 256
- Host-side ordered tag support
Drive Interface
- Twenty-four (24) hot-swappable 3Gbps SATA II drive trays that accommodate 1-inch pitch SATA II or SATA I disk drives
- Native Command Queuing (NCQ) support
- Dedicated bandwidth to each connected drive
- Automatic bad sector reassignment
Management
- Firmware-embedded utility via LCD keypad or RS-232C terminal
- 10/100BaseT Ethernet for out-of-band management
- Two (2) COM ports for local access to firmware-embedded utility and UPS connectivity
- Telnet access via onboard Ethernet port
- Java-based RAIDWatch® Manager
- Graphical user interface
- Local/remote management; in-band or out-of-band via TCP/IP
- Centralized management of multiple subsystems from one management computer
- A variety of event notification methods via the Configuration Client sub-module: email, fax, LAN broadcast, SNMP traps, MSN messenger, ICQ, and SMS short messages
- Secure link over SSL
Indicators
- Onboard alarm
- Module status LED indicators
- Two (2) per drive tray
- Two (2) per cooling module
- One (1) per power supply unit
- One (1) per BBU module
- Three (3) per LCD panel
- Four (4) per RAID controller module
- Two (2) per Ethernet port
- Module failure indication and temperature/voltage readings through I2C bus
Physical/Electrical
Interfaces
Four (4) 68-pin VHDCIs in dual-stacked configurations Two (2) COM ports for RS-232C terminal and UPS connection (38400, n, 8, 1) One (1) 10/100BaseT Ethernet port
Power Supply Module
Three (3) redundant, hot-swappable power supplies with PFC
| Nominal Power | 405W |
|---|---|
| DC Output | +3.3V: min. 0.5A, max. 20A +5V: min. 2.5A, max. 36A +12V: min. 1A, max. 24A +5V SB: min. 0A, max. 0.5A |
| Input Frequency | 47 to 63Hz |
| AC Input | 90VAC @ 8AC , 264VAC @ 4AC with PFC |
Cooling Module
Two (2) redundant, dual-fan cooling modules
Environmental Specifications
| Humidity | 5% to 95% (non condensing operating and non-operating) |
|---|---|
| Temperature | Operating : 5º to 40ºC Non-operating : - 40º to 60ºC |
| Altitude | Operating : sea level to 12,000 ft Non-operating : sea level to 40,000 ft |
Dimensions
- Chassis without handles: 445W x 174.4H x 498D mm (17.6 x 6.86 x 19.6 inches)
- Chassis with handles 482W x 174.4H x 514D mm (18.97 x 6.86 x 20.2 inches)
- Package: 590W x 480H x 700D mm
System Weight
- Net weight: 36.5kg
- Gross weight: 39.6kg
Spare Parts
| IFT-9373CDTray | 3.5" Hard disk drive tray | |
|---|---|---|
| IFT-9274CPSU | Power supply module, EonStor 4U 24-bay subsystems, 405W (N+1) capacity | |
| IFT-9274CFanMod | Cooling fan module for EonStor 4U 24-bay subsystems | |
| IFT-9274CHandLLCD | Left-side forearm handle for EonStor 4U 24-bayRAID subsystems, LCD panel included | |
| IFT-9274CHandR | Right-side forearm handle for EonStor 4U 24-bay subsystems | |
| IFT-84AU24GD24E2 | SCSI to SATA RAID controller module, for ES A24U-G2421-2 subsystem, 4 x SCSI-320 VHDCI host connectors, RAID 6. | |
| IFT-DDRESCEM5 | 512MB DDR RAM DIMM module, for ASIC266 platform | |
| IFT-9270ASCab | RS-232C serial cable, audio-jack to DB9 | |
| IFT-9011 | Null Modem, DB9 female to DB9 male, wires swapped |
Accessories
| IFT-9272CDTrayDmy | Dummy Drive tray, Type-II bezel | |
|---|---|---|
| IFT-9274CBTE | Battery cell pack, Li-Ion, EonStor 4U 24-bay subsystems | |
| IFT-9270UHstCab | SCSI external round cable, DB68 to VHDCI | |
| IFT-9270UJBODCab | SCSI external round cable, VHDCI to VHDCI | |
| IFT-9270CUPSCab | UPS cable, audio-jack to DB9 | |
| IFT-9373CSLIDER36 | Slide rail assembly, for all EonStor G6 and EonStor DS subsystems, 24"~36" rack depth | |
| IFT-DDRESCEMA | 1GB DDR RAM DIMM module, for ASIC266 platform |
This model is discontinued; the recommended offering is EonStor DS SAN storage.
Form Factor
4U 24-bay
Environmental
- Temperature:
- Operating: 0°C to 40°C
- Non-operating: -40°C to 60°C
- Altitude:
- Operating: Sea level to 3,048 m (10,000 ft)
- Non-operating: Sea level to 12,192 m (40,000 ft)
- Relative humidity: 5% to 95% non-condensing, operating or non-operating
The “Purchase Reference” feature enables customers to request a quote from Infortrend sales representatives. Please note that actual product orders and purchases are not processed via Infortrend's website. If you wish to order and purchase Infortrend products, please contact our sales representatives directly.
Please note the following:
- The list below is based on standard worldwide shipment, models may vary by region. Infortrend sales representatives can provide more information about shipment variations in your region.
- “Default Included” means that a component is standard included in system orders. Customers may order additional units to serve as spare components.